2 U
65 mm deep
Current Draw
? mA +15V
? mA -15V
? mA 5V

This Module is currently available.

CGS36 Pulse Divider / Boolean Logic


Integer pulse divisions and Logic utilities

Cat Girl Synthesizer's CGS36 Pulse Divider / Boolean Logic module built by Lower West Side Studio

This module consists of several parts, a pulse divider with integer divisions between 2 and 8, and several logic elements. The divider is used to generate interrelated pulses for use in creating poly-rhythms, and unusual sequences. It can also be run at audio frequencies as a sub-oscillator/sub harmonic generator. The output pulse from each division is one clock cycle in length, and the relationship between pulses is fixed. Specifically, the /4 output will correspond to every second pulse from the /2 output. Likewise, the /8 will correspond to every second pulse from the /4 output, and the /6 will correspond to every second pulse from the /3 output. Needless to say, the /2 and /3 groups are not related to each other, or to the /5 or /7 outputs. All however share a common external reset, so they can be synchronized. All outputs go high on reset.

As well as the pulse divider, there are also five boolean logic elements. Two are basic inverters. If you apply a LOW (e.g. a gate output in its OFF state) they will give a HIGH (gate ON) output, and vice versa. The OR gate has two inputs, and gives a HIGH whenever oneor both inputs are HIGH. The AND gate has two inputs, and gives a HIGH only when both inputs are HIGH. The fifth is an exclusive OR gate (XOR), giving a LOW when both inputs are within 1.2 volts of each other, and a HIGH when they are not. The OR, AND and XOR also offer inverted outputs, giving the option of using them as NOR, NAND and XNOR gates. Unlike the Analog Logic module, these are for processing gate, trigger and clock signals, although the XOR gate can accept linear inputs as well.

The CGS36 comes in a 2U width. A momentary pushbutton controls the module’s reset function (also controllable via CV) allowing you to manually force a reset or keep the module in a reset state until the button is released.


submitted Mar 19th 2018, 16:34 by Flareless | last Change Jul 17th 2020, 09:24 by Flareless
Affiliate Disclosure
This page contains affiliate links from eBay, Reverb.com and other partners for which ModularGrid may be compensated.




Lower West Side Studio

These merchants probably sell this module. Huh?