LA ROUTE

LA ROUTE has a dual 1 to 4 or vice versa architecture. Signals can be fed in both directions.

LA ROUTE has a dual 1to4 or vice versa architecture. Signals can be fed in both directions. Switching frequencies of several kHz is no problem for the circuit.

The 1to4 / 4to1 input jacks are used for the signals to be processed.

The SELECT potentiometer sets the multiplexer channel manually and is summed with the voltage present at the CV input that is used to choose the corresponding switch in the multiplexer channel. Channel 2 is sellected with 2.5v, channel 3 with 5v and channel 4 with 7.5v.

The HOLD is used to disable the routing function of the modules. All switches are isolated when a logic high (>1V) is present.

The module can be used for many purposes.

For example:
• Choose waveforms from an oscillator
• Choose Filter Output (or Input) characteristics from a State Variable Filter
• Multiplexing
• VC switch
• Patch Variations (Open/Closed Hihats, something like that)
• By chaining the two circuits “back2back2” (4to1, 1to4) you can achieve complex
source destination scenarios with lots of possibilities.

In the middle you will find a precision processor. Select with a manual switch between + and – 5 or 10v. Select also with a manual switch if it has to be an attenuvertor or a attenuator.

Mix audio sources or CVs.
Add offsets to CVs, or change their polarity.
Transpose the output of a sequencer without compromising V/O tracking.
Attenuate/invert CVs sent to modules which do not have attenuverters on their CV inputs.

https://www.mangoest.be/?product=la-route