Hi All,
I just got the Mordax Data today and added it to my current 104hp rack with a Tiptop uZeus. When I powered it on I noticed the -12v LED was no longer lit on the uZeus. Looking at the total Power Consumption I figured I was ok as the totals are less than the specs on the uZeus (2000mA at +12V, 500mA at -12V, 170mA at +5V). Note that I have a regular $25 Tiptop wall wart.
So I unplugged the Mordax and the -12v LED went back on so my assumption is that I'm overloading the power supply. I then experimented a bit by removing different modules and I was able to get the set up to work as long as I removed the B-140 envelope module.
Are there any users who have more experience with power usage that can explain why the uZeus is unable to power the set up I have shown?
thanks for your help