Hello,
This is my very first post, thanks everyone in advance.
I recently bought a basic system 500 setup, it's comprised by 512, 521, 530, 540 and 572.
I am encourring two issues which i hope someone could give his/her advice one.
I can't get any sound out of it if the VCA Initial knob is not turned on. If i increse the initial level, everthing is fine but i can't get any sound from external source if the initial parameter is set to zero. I've tried with an arturia keystep and a korg sq64. The connection i use are:
Arturia/Korg Pitch into the 512 VCO Key
Arturia/Korg Gate into the 530 Ext
If i increse the initial VCA level and play on the arturia, i can hear the different notes but if i put the initial VCA to 0, no sounds come out. Any ideas? Looks like the gate does not work.I noticed that the sound the two Oscillator (512) is not the same. If i use the same parameter on the first section and second section, the sound i can hear is very different, with the second part being much more calm and lower then the frist. I am wondering if this is by design and hence exepceted or if the module is somehow broken.
Thanks in advance for the help,
Regards,
Matteo