Dimensions
3 U
Current Draw
40 mA +15V
55 mA -15V
? mA 5V
Price
$270 Price in €

Available as an assembled Module and as a DIY project.

This Module is currently available.

M2Synth State variable filter 112

State variable filter

The voltage controlled 4-pole quad filter with low pass, high pass, band pass and an all pass filter commonly referred to as a state variable filter. Unlike many state variable filters, the 112 maintains a 24dB / Octave response and allows for individual CV control of each filter type. The HP, BP and AP filter input signals can each be switched between the main signal input or to the low pass output or switched off completely. This allows for some rather complex filter sounds using a combination of series and parallel configurations.

Features:
1 Volt / Octave cut-off frequency CV for each filter type plus a common CV input that controls all filters at once.
Resonance potentiometer control with external CV control (controls all filter types)
Each filter type has its own output
A 4-channel output mixer blends the outputs of all 4 filter types to a common output
Switches control the HP, BP and AP filter input route - off, main input signal or the LP filter output

Specification:
Supply voltage +/-15dc (Uses included in-line voltage regulator module with both MOTM and MU headers)
Supply current +40mA / -55mA
Waveform levels +/-5V

https://m2synth.com/MU-Filters/MU-State-Variable-Filter-112


submitted Aug 9th 2023, 13:49 by Prunesquallor
Affiliate Disclosure
This page contains affiliate links from eBay, Reverb.com and other partners for which ModularGrid may be compensated.