Dual Gate Delay

Delayed and Slewed Gate Output

The Dual Gate Delay has two separate units that can be triggered either by one single GATE signal or by two separate GATE signals.

Each unit provides two output signals : a delayed GATE signal (0-10V) with delay that can be set between 1ms and 1s; a log rising control voltage (0-10V).

The Lower West Side Studio version of the Dual Gate Delay features 3-position normalizing switch. This allows Gate Delay # 2 to be normalized to either the Gate Input or Gate Output or Gate Delay #1. The 3rd position disables normalization.

This module is useful for building up complex cannon sequences, trigger delayed events or to drive a VCA for creating a delayed vibrato. The output GATE signal is on only if the input GATE signal is still on. The output GATE signal returns to 0V as soon as the input is off. The output SLEW signal starts rising when the input GATE signal is set, and stabilizes at 10V. It returns to 0Vas soon as the input is off.

https://richsstudioproject.wpcomstaging.com/product/dgd/