ModularGrid uses so-called cookies to ensure it's so-called functionality. We also use dubious tracking scripts. Find out more in the Privacy Policy. We use cookies and wanna let you know.
Got it.
500 Series 3-band Parametric Equalizer, with Switchable Peak/Shelf Curves for Low and High Bands, and Infinite Notch Mode for Extreme Attenuation
Go to the Module Detail PageIf you had an Unicorn Account you could see a chart with the price development of this module and the average price asked for this module.
Manufacturer's Description The dbx 530 Parametric EQ offers a unique degree of equalization flexibility in the popular 500 Series format. Based upon the classic dbx 905, the dbx 530 is an uncompromising equalizer offering true, fully parametric operation of all three filter bands! dbx has a much-heralded history with modular processors dating back to our 900 Series, and the dbx 530 continues that tradition.The dbx 530's overlapping bands each offer control of frequency bandwidth (Q) and up to 15dB of reciprocal cut or boost to provide exact, complimentary filter action for the most demanding of equalization needs. For problem situations requiring the removal of spurious signals, each of the bands can be independently switched into “infinite notch” mode without affecting the operation of others. In situations where a shelving equalizer will produce better results than a peaking one, the 530’s high and low bands can be independently switched from peaking to shelving operation. You can also make instant affected/bypassed comparisons using the 530's “On” switch.Load up your 500 Series rack with dbx 530 Parametric EQs and cut your way through mixes like an audio surgeon!FeaturesBased on the classic dbx 9053-band parametric EQSelectable bell or shelf type filters on low and high frequency bandsAdjustable Q on each band Specifications Input Type: Electronically balanced/unbalanced, RF filteredInput Impedance: 40k Ohms balanced, 20k Ohms unbalancedMax Input Level: +22dBuCMRR: >40dB; typically >55dB at 1kHzOutput Type: Electronically balanced/unbalanced, RF filteredOutput Impedance: Balanced 30 Ohms, unbalanced 15 OhmsMax Output Level: +22dBuFrequency Response: 20Hz - 20kHz, +0/-1dB; <10Hz - 30kHz, +0/-3dBNoise: -90dBu, Unweighted (22Hz - 22kHz)THD+Noise: <0.006% typical, 20Hz - 20kHz, 0dBu outDynamic Range: 112dBEQ Filter Type: Each band symmetrical peak/dip, each band switchable to Infinite Notch mode, high and low bands switchable to symmetrical shelvingEQ Center Frequencies: Low band = 20 Hz – 500 Hz, mid band = 200Hz – 5 kHz, high band = 800 Hz – 20 kHzEQ Range: ±15 dB, peak or shelvedEQ Infinite Notch Attenuation: Typically > 40dBPower Requirements: +/- 16V DCPower Current Draw: 85 mA per power railPower Draw: 2.72 wattsRack System Compatibility: 500 Series Compatible Power-frameRack Space: 1 SlotDimensions (H x W x D): 5.25” x 1.5” x 6” (13.34 cm x 3.81 cm x 15.24 cm)Weight: 1.3 lbs (0.59 kg)
This offer was fetched from reverb.com. You cannot contact the seller via ModularGrid. You have to visit their site.
Look up onDisclaimer: Modules listed for sale on the ModularGrid Marketplace are offered explicitly by their respective owners. ModularGrid is not affiliated to the sellers and takes no legal responsibility in any transaction.
The internet is a rough place and fraudulent behavior can occur. If you are concerned about dealing with strangers consider buying your module at an authorized dealer.