VUPPM500 Stereo Meter

2x 40 LED Meter displays PPM and VU ballistics with peak hold at the same time.

VUPPM500 Stereo Meter

2x 40 LED Meter displays PPM and VU ballistics with peak hold at the same time.

50dB range. 30 x 1dB and 10 x 2dB steps
Reversable Black PCB front panel with +18dBu scale on one side and 0dBFS on other.
Mode Switch - VUPPM, Colour Mode 1, Colour Mode 2.
Peak Reset Switch clears Peak Hold LED
Peak Mode Switch - PPM Peak hold, PPM Peak Decay, VU Peak Decay & PPM Peak Hold, VU & PPM Peak Decay.
VUPPM mode shows VU in Green over PPM in red.
Colour modes shows Classic VU Green, Yellow, Red with PPM peak led.
Colour modes can be customised to any combo of colours before shipping.
Meters use 500 rack pin 6 link wire to communicate and sync all meters.
Inputs Balanced Analog (with AES / SPDIF option coming soon)
Left in on input and right in on output with short female to female lead or TRS in and out on our Eleven rack.
If AES card fitted input XLR is AES digital stereo input. (with AES / SPDIF option coming soon)
Blue LEDs mark ends of LED display and +4dBM 0VU and 0dBM PPM or AES digital input -14dfs K14 and -18dfs K18.
The 500 end pcb unbolts and is reversable for horizontal racks.
Test Mode press Colour Mode and Peak Mode switch together. All leds on RED then Green then Yellow, Loop.
3 Brightness level set by peak reset switch while in test mode.

https://www.jlmaudio.com/shop/vuppm-500-stereo-meter.html?display_tax_prices=1